5kg Glaze Color Texture Wall Paint Highly Efficient Decomposition Of Formaldehyde

Texture Wall Paint 5kg Glaze color Highly efficient decomposition of formaldehyde

Product Features

1. Efficient decomposition of formaldehyde (formaldehyde purification performance ≥ 90%)

2. Release of negative oxygen ions (continuous release of 1000-2000/cm³)

3. Smoking deodorization

4. Moisture absorption and moisture resistance

5. Antibacterial and mildew-proof (I-level antibacterial, 0-level mildew-proof)

6. Stain-resistant and rub-resistant (I-level anti-stain, washable times ≥ 6000)

7. Odor-free and environmentally friendly

8. Artistic texture: looming sandy texture, smooth texture, soft and bright luster, and smooth coating.

Product Use

Suitable for special effect decoration of indoor walls of various buildings such as high-end residences, villas, hotels, clubs, venues, office buildings, public areas, etc.

Technical Parameters

 Theoretical dosage: about 4-5㎡/1KG/2 times depending on the specific process, the actual construction area will vary due to different personal construction techniques and processes.

 Dilution ratio: 20-30% of clean water can be used for dilution depending on the specific construction situation.
 Drying time: Depending on the actual construction process, the drying time varies.
 Maintenance time: 7 days/25℃, low temperature (not less than 5℃) can be extended to obtain the ideal coating effect.
 Implementation standards: GB18582-2020 "Limits of harmful substances in building wall coatings", GB/T9756-2018 "Synthetic resin emulsion interior wall coatings" superior products.
 Product specifications: 5KG/barrel.
 Shelf life: See product label.

Usage method

 Construction method: patting, brushing, spraying, turf vertical grain, etc.
 Construction tools: material tray, palette knife, masking paper, short-hair roller, brush, wool pat, cloth grain brush, spray gun, etc.
Construction process: ①On the putty layer, roll on one coat of penetrating sealing primer and wait until it is completely dry;
②Roll on the first coat of Imosha S primer and wait until it is completely dry;
The primer needs to be the same color (same color as the topcoat), and the materials need to be mixed evenly. When constructing, it is advisable to apply the slurry evenly on the wall from the upper part to the lower part, from left to right, from inside to outside, from easy to difficult, and use a roller or spray gun to apply the slurry evenly on the wall. The force should be uniform and no coating should be missed; after the primer is completed, the wall needs to be patched, and the primer must be applied after the patch is polished and smoothed; after the primer is rolled on a large area, the corners of the wall must be painted in place, and the coating surface must be allowed to dry and dry to the touch, and the topcoat can be applied only after it is not sticky when pressed by fingers.
③Roll the second coat of Imosha S primer and wait for it to dry thoroughly;
④Roll the first coat of glazed color, and then apply it with wool or cloth brush according to specific process requirements to form specific process patterns, and wait for it to dry thoroughly;
⑤Roll the second coat of glazed color, and then apply it with wool or cloth brush according to specific process requirements to form specific process patterns.
Construction environment: It is not suitable for construction when the temperature is lower than 5℃ or the relative humidity is above 80%.
Base treatment: Before construction, clean the surface of the base to be painted to ensure that the construction surface is clean, free of grease, floating dust, mold algae and other attachments; the construction surface must be flat and dry, without hollows, holes, protrusions, etc.; new base surfaces such as gray sand, plaster, cement, etc. (pH value is lower than 10, moisture content is lower than 10%) should be dried before construction.
During construction, please configure necessary protective and labor protection supplies according to local operating specifications, such as protective glasses, gloves and professional construction clothes.
Before construction, the paint should be fully stirred and used in a certain proportion. The mixing container must be clean and free of other chemical substances.
Please use clean water to clean the equipment in time during and after construction.

Precautions

If the product leaks, it can be covered with sand or soil for absorption.
The treatment of pollutants after absorption, including cans and unused containers, should be handled in accordance with local environmental protection standards.
Never discharge discarded paint waste into drains or water sources.
If this product accidentally enters your eyes when using it, please rinse with clean water in time. If you feel uncomfortable, please seek medical treatment in time.
In order to better protect the legitimate rights and interests of users, please do not purchase products with incomplete labels and beware of counterfeiting.
For any unknown information, please ask the local dealer for the product manual.