Antibacterial Texture Wall Paint 5kg Starry Sky Elegant Pure Color And Matte Luster

Texture Wall Paint 5kg Starry sky elegant pure color and matte luster Release negative oxygen ions 

Product Features

1. Efficient decomposition of formaldehyde (formaldehyde purification performance ≥ 90%)

2. Release of negative oxygen ions (continuous release of 1000-2000/cm³)

3. Smoking deodorization

4. Moisture absorption and moisture resistance

5. Antibacterial and mildew-proof (I-level antibacterial, 0-level mildew-proof)

6. Stain-resistant and rub-resistant (I-level anti-stain, washable times ≥ 6000)

7. Odor-free and environmentally friendly

8. Artistic texture: It has a slightly shiny effect like a star, smooth and delicate touch, simple and pure color, matte luster.

Application

Suitable for special effect decoration of indoor walls of various buildings such as high-end residences, villas, hotels, clubs, venues, office buildings, public areas, etc.

Technical Parameters

 Theoretical dosage: Depending on the specific process, it is about 4-5㎡/1KG/2 times. The actual construction area will vary due to different personal construction techniques and processes.

 Dilution ratio: According to the specific construction situation, no more than 10% of clean water can be added for dilution.
 Drying time: Depending on the actual construction process, the drying time varies.
 Maintenance time: 7 days/25℃, low temperature (not less than 5℃) can be extended to obtain the ideal coating effect.
 Implementation standards: GB18582-2020 "Limits of harmful substances in building wall coatings", GB/T9756-2018 "Synthetic resin emulsion interior wall coatings" superior products.
 Product specifications: 5KG/barrel.
 Shelf life: See product label.

Usage method

 Construction method: rolling, spraying, brushing, etc.
 Construction tools: material tray, palette knife, masking paper, short-hair roller, brush, etc.
Construction process: ①On the putty layer, roll the first coat of anti-alkali sealing primer and wait for it to dry;
②Roll the second coat of anti-alkali sealing primer and wait for it to dry;
③Roll the first coat of starry sky color and wait for it to dry;
During construction, the corners of the wall must be painted first. When the corners are not completely dry, a large area of rolling should be carried out. It is advisable to apply the slurry evenly to the wall from the upper part to the lower part of the wall, from left to right, from inside to outside, from easy to difficult, and use a roller or spray gun to apply the slurry evenly to the wall. The force should be uniform and no coating should be missed; the brushing speed should be consistent and the force should be uniform to ensure uniform coating. When rolling, it is strictly forbidden to squeeze the roller when the roller does not absorb much material; when brushing, the number of back and forth brushing should not be too many to prevent bubbling or leaving brush marks; normal rolling construction must be rolled and collected at the same time. When recycling, the roller must be collected in the same direction, and it is strictly forbidden to roll back and forth; rollers without dead angles should be selected for rolling. Try to stay close to the edge during construction; special areas such as corners, skirtings, and gypsum ceilings can be repaired with a brush.
④ Apply the second coat of starry sky color (add glitter powder at the same time).

Construction environment: It is not suitable to apply when the temperature is below 5℃ or the relative humidity is above 80%.
Base treatment: Clean the surface of the base to be painted before construction to ensure that the construction surface is clean, free of grease, floating dust, mold algae and other attachments; the construction surface must be flat and dry, without hollows, holes, protrusions, etc.; new base surfaces such as ash sand, plaster, cement (pH value below 10, moisture content below 10%) should be dried before construction.
During construction, please configure necessary protective and labor protection supplies such as protective glasses, gloves and professional construction clothes according to local operating specifications.
Before construction, it should be fully stirred and used in a certain proportion. The mixing container must be clean and free of other chemical substances and debris.
Please use clean water to clean the utensils in time during and after construction.

Precautions

If the product leaks, cover it with sand or soil for absorption.
For the treatment of pollutants after absorption, including cans and unused containers, they should be handled in accordance with local environmental protection standards.
Never discharge discarded paint waste into drains or water sources.
If you accidentally get into your eyes while using this product, please rinse with clean water in time. If you feel uncomfortable, please seek medical attention in time.
In order to better protect the legitimate rights and interests of users, please do not purchase products with incomplete labels and beware of counterfeiting.

Technical Data Sheet