10kg Sealing Primer Alkali Resistant Seal The Base Layer And Protect The Topcoat Effect

10kg Alkali-Resistant Sealing Primer Seal The Base Layer And Protect The Topcoat Effect Strong Adhesion

Product Features

1. Good alkali resistance: effectively inhibit the precipitation of alkaline substances on the wall, and protect the decorative effect of the topcoat for a long time.
2. Good hiding power: cover fine cracks and save the amount of topcoat.
3. Healthy and environmentally friendly: low content of harmful substances such as formaldehyde, benzene, and soluble heavy metals.
4. Simple construction.

Product Use

Suitable for use with interior wall topcoat primer.

Technical Parameters

 Theoretical dosage: about 8-10㎡/KG/1 coat, the actual consumption varies depending on the construction method and the flatness of the base.
 Dilution ratio: according to the actual situation, no more than 5% of clean water can be added for dilution.
 Drying time: about 2 hours for surface drying; recoating time is at least 2 hours (25℃, 50% relative humidity), and it can be extended moderately at low temperature.
 Maintenance time: 7 days/25℃, low temperature (not less than 5℃) can be extended to obtain an ideal coating effect.
 Implementation standards: GB18582-2020 "Limits of Hazardous Substances in Wall Coatings for Buildings", GB/T9756-2018 "Synthetic Resin Emulsion Interior Wall Coatings".
 Product specifications: 20KG/barrel.
 Shelf life: See product label.

Usage

 Construction methods: rolling, spraying, brushing, etc.
 Construction environment: It is not suitable for construction when the temperature is below 5℃ or the relative humidity is above 80%.
 Base treatment: Before construction, clean the base surface to be painted to ensure that the construction surface is clean, free of grease, floating dust, mold algae and other attachments; the construction surface must be flat and dry, without hollows, holes, protrusions, etc.; new base surfaces such as ash sand, plaster, cement, etc. (pH value is less than 10, moisture content is less than 10%) should be dried before construction.
 During construction, please configure necessary protection and labor protection supplies according to local operating specifications, such as protective glasses, gloves and professional construction clothes.
Before construction, stir thoroughly and use in a certain proportion. The mixing container must be clean and free of other chemical substances.
Please use clean water to clean the equipment in time during and after construction.

Precautions

If the product leaks, it can be covered with sand or soil for absorption.
For the treatment of pollutants after absorption, including cans and unused containers, they should be handled in accordance with local environmental protection standards.
Never discharge discarded paint waste into drains or water sources.
If this product accidentally enters your eyes when using it, please rinse with clean water in time. If you feel uncomfortable, please seek medical treatment in time.
In order to better protect the legitimate rights and interests of users, please do not purchase products with incomplete labels and beware of counterfeiting.
For any unknown information, please ask the local dealer for the product manual.

Storage conditions

Store in a closed place at 5℃~35℃ in a cool and dry place, strictly prevent frost and avoid sunlight.