6kg Interior Wall Paint Eco Friendly Primer Alkali Resistance Strong Adhesion

6kg Eco- Friendly Primer Strong Alkali Resistance Effectively Prevent And Inhibit Problems Such As Flowery Walls Caused By Alkali Blooming Strong Adhesion And Good Covering Power

Main ingredients:

Organic modified inorganic mineral gelling materials, high-quality alkali-resistant components, titanium dioxide, environmentally friendly additives, deionized water, etc.

Product features

1. High alkali resistance: effectively prevent and inhibit the wall from blooming due to alkali efflorescence and other problems.

2. Good permeability: can fully wet the wall base and make the base dense.

3. Strong adhesion: improve the adhesion of the base surface and balance the color difference of the base surface

4. Good covering power: cover fine cracks and save the amount of topcoat.

5. Odor-free and environmentally friendly: formaldehyde, benzene, soluble heavy metals and other harmful substances are not detected.

Product use

Suitable for use with interior wall topcoat primer.

Technical parameters

Theoretical dosage: about 8-9㎡/1kg/1 coat depending on the specific process. The actual construction area will vary due to different personal construction techniques and processes.

Dilution ratio: dilution with water is not recommended.
 Drying time: Surface drying takes about 2 hours; recoating time is at least 2 hours (25℃, 50% relative humidity), and it can be extended moderately at low temperature.
 Maintenance time: 7 days/25℃, which can be extended at low temperature (not lower than 5℃) to obtain the ideal coating effect.
 Implementation standards: GB18582-2020 "Limits of Hazardous Substances in Wall Coatings for Buildings", GB/T9756-2018 "Synthetic Resin Emulsion Interior Wall Coatings".
 Product specifications: 6KG/barrel, 10KG/barrel.
 Shelf life: See product label.

Usage

 Construction method: rolling, spraying, brushing, etc.
 Construction environment: It is not suitable for construction when the temperature is lower than 5℃ or the relative humidity is above 80%.
 Base treatment: Before construction, clean the surface of the base to be painted to ensure that the construction surface is clean, free of grease, floating dust, mold algae and other attachments; the construction surface must be flat and dry, without hollows, holes, protrusions, etc.; new ash sand, plaster, cement and other base surfaces (pH value below 10, moisture content below 10%) should be dried before construction.
 During construction, please configure necessary protection and labor protection supplies according to local operating specifications, such as protective glasses, gloves and professional construction clothes.
 Before construction, stir well and use in a certain proportion. The preparation container must be clean and free of other chemical substances.
 During and after construction, please use clean water to clean the equipment in time.

Precautions

 If the product leaks, it can be covered with sand or soil for absorption.
 For the treatment of pollutants after absorption, including cans and unused containers, it should be handled in accordance with local environmental protection standards.
 Do not discharge discarded paint waste into drains or water sources.
If the product gets into your eyes accidentally, please rinse with clean water in time. If you feel uncomfortable, please seek medical attention in time.
To better protect the legitimate rights and interests of users, please do not buy products with incomplete labels and beware of counterfeiting.
For any unclear information, please ask your local dealer for the product manual.

Storage conditions

Store in a closed place at 5℃~35℃ in a cool and dry place, strictly prevent frost and avoid sunlight.

Specification