Texture Paints Eggshell Luster 4-5m2 1KG With 2 Coats Release Negative Oxygen Ions

Texture paints Eggshell luster 4-5㎡ 1KG with 2 coats release negative oxygen ions

Product Introduction

Texture paints Eggshell is an exquisite and simple pure color diatom art paint, which is not only elegant and beautiful, but also durable, with a smooth and delicate coating and an eggshell-like texture, making it suitable for large-area artistic painting.

Main Materials

High-quality diatomaceous earth, natural plant extract, modified odor-free anti-fouling emulsion, titanium dioxide, environmental protection additives, deionized water, etc.

Product Features

1. Efficient decomposition of formaldehyde (formaldehyde purification performance ≥ 90%)
2. Release of negative oxygen ions (continuous release of 1000-2000/cm³)
3. Smoking deodorization
4. Moisture absorption and moisture resistance
5. Antibacterial and mildew-proof (I-level antibacterial, 0-level mildew-proof)
6. Stain and abrasion resistance (I-level stain resistance, washing resistance ≥ 6000 times)
7. Odor-free and environmentally friendly
8. Artistic texture: simple and stylish, exquisite pure color, smooth and delicate touch, with unique eggshell texture and luster.

Technical Data Sheet

 Application  Wall

 Suitable for special effect decoration of interior walls of various buildings such as high-end residences, villas, hotels, clubs, venues, office buildings, public areas, etc.

 Application method

Construction method: rolling, spraying, brushing, etc.
Construction tools: material tray, palette knife, textured paper, short-hair roller, brush, water-based spray gun, etc.

Construction process: ①On the putty layer, apply 1 coat of penetrating sealing primer and wait for it to dry thoroughly;
②Roll the first coat of eggshell finish and wait for it to dry thoroughly;
During construction, the corners of the wall must be painted first. When the corners are not completely dry, a large area of ​​rolling should be carried out. It is advisable to apply the slurry evenly on the wall from the upper part to the lower part, from left to right, inside first and then outside, easy first and then difficult. Use a roller or spray gun to apply the slurry evenly to the wall. The force should be uniform and no coating should be missed; the brushing speed should be consistent and the force should be uniform to ensure uniform coating. When rolling, it is strictly forbidden to squeeze the roller when the roller does not absorb much material; when brushing, the number of back and forth brushing should not be too many to prevent bubbling or leaving brush marks; normal rolling construction must be rolled and collected at the same time. The roller must be collected in the same direction during recycling, and it is strictly forbidden to roll back and forth; rollers with no dead angles should be selected for roller coating construction. Try to stay close to the edge during construction; special areas such as corners, skirtings, and gypsum ceilings can be repaired with brushes for details.
③ Eggshell finish for the second roller coating.
Construction environment: It is not suitable for construction when the temperature is below 5℃ or the relative humidity is above 80%.
Base treatment: Clean the surface of the base to be painted before construction to ensure that the construction surface is clean, free of grease, floating dust, mold algae and other attachments; the construction surface must be flat and dry, without hollows, holes, protrusions, etc.; new base surfaces such as ash sand, plaster, cement, etc. (pH value is less than 10, moisture content is less than 10%) should be dried before construction.
Please configure necessary protective and labor protection supplies such as protective glasses, gloves and professional construction clothes according to local operating specifications during construction.
Before construction, it should be fully stirred and used in a certain proportion. The preparation container must be clean and free of other chemical substances.
Please use clean water to clean the equipment in time during and after construction.

Precautions

If the product leaks, it can be covered with sand or soil for absorption.
For the treatment of pollutants after absorption, including cans and unused containers, they should be handled in accordance with local environmental protection standards.
Never discharge discarded paint waste into drains or water sources.
If you accidentally get into your eyes when using this product, please rinse with clean water in time. If you feel uncomfortable, please seek medical treatment in time.
In order to better protect the legitimate rights and interests of users, please do not purchase products with incomplete labels and beware of counterfeiting.
For any unclear points, please ask the local dealer for the product manual.