Anti Virus Interior Walll Paint Deep Blue Shield graphene Odor Free for Kid Room

Anti Virus Interior Walll Paint Deep Blue Shield graphene Odor Free for Kid Room

Product Introduction

This product is carefully made of graphene-based composite antiviral materials, high-quality diatomaceous earth, organically modified inorganic mineral gelling materials, nano-titanium dioxide/diatomaceous earth composite photocatalytic materials and other raw materials. The product does not contain formaldehyde, benzene, soluble heavy metals and other harmful substances. It has antiviral and antibacterial effects, can adsorb and decompose formaldehyde and other harmful substances, and create a healthy, fresh and quiet home environment.

Main Materials

Graphene-based composite antiviral materials, high-quality diatomaceous earth, organically modified inorganic mineral gelling materials, nano-titanium dioxide/diatomaceous earth composite photocatalytic materials, titanium dioxide, environmental protection additives, deionized water, etc.

Product Features

1. Virus disinfection and sterilization: Using new graphene-based composite antiviral technology, the inactivation rate of human coronavirus (HCoV-229E) is as high as 99.75%, and the antibacterial rate of Escherichia coli and Staphylococcus aureus is as high as 99.9%, protecting human health.
2. Purify formaldehyde: Decompose harmful substances such as formaldehyde, and the formaldehyde purification performance is ≥95%.
3. Odor-free and environmentally friendly: The product has no irritating odor, does not contain harmful substances such as formaldehyde, benzene, heavy metals, etc., and protects home health.
4. Moisture absorption and moisture-proof: absorb excess moisture to resist the phenomenon of water droplets hanging in the south sky.
5. Anti-mildew and antibacterial: inhibit the growth of mold, and the wall surface is as new as ever.
6. Scrub resistance: The number of washes is ≥1500 times, which meets the first-class standard of interior wall paint.
7. Rich colors: 1190 color schemes.
8. Simple construction: No need to mix, it can be directly applied to the wall.

Technical Data Sheet

 Application  scenarios

 high-grade residential,villa, hotel, apartment, school, Museums
Cinemas,Hospitals,Art galleries,Concert halls,Office buildings, Factories

Application steps:

 Application method: rolling, spraying, brushing, etc.
 Application tools: material tray, palette knife, masking paper, short-hair roller, brush, water-based spray gun, etc.

 Application process:

① On the putty layer, roll one coat of water-based diatom environmental protection primer and wait for it to dry;

② Roll the first coat of Deep Blue Shield Graphene Antiviral Water-based Diatom Paint and wait for it to dry;
During Application, the corners of the wall must be painted first. When the corners are not completely dry, roll a large area. It is advisable to apply the slurry evenly on the wall from the upper part to the lower part, from left to right, inside first and then outside, easy first and then difficult. Use a roller or spray gun to evenly apply the slurry to the wall. The force should be uniform and no missing paint should be applied; the brushing speed should be consistent and the force should be uniform to ensure uniform coating. During roller coating, it is strictly forbidden to squeeze the roller when the roller does not absorb much material; when brushing, the roller should not be brushed back and forth too many times to prevent bubbles or brush marks; normal roller coating must be rolled and collected at the same time. When recycling, the roller must be collected in the same direction, and it is strictly forbidden to roll back and forth; rollers without dead angles should be selected for roller coating. Try to stay close to the edge during Application; special areas such as corners, skirtings, and gypsum ceilings can be repaired with brushes for details.

③ Roller coating for the second coat of Deep Blue Shield Graphene Antiviral Water-based Diatom Coating.
 Application environment: It is not suitable to construct when the temperature is below 5℃ or the relative humidity is above 80%.
 Base treatment: Clean the surface of the base to be painted before Application to ensure that the Application surface is clean, free of grease, floating dust, mold algae and other attachments; the Application surface must be flat and dry, without hollows, holes, protrusions, etc.; new base surfaces such as gray sand, plaster, cement (pH value below 10, moisture content below 10%) should be dried before Application.
During Application, please configure necessary protective and labor protection supplies according to local operating specifications, such as protective glasses, gloves and professional Application clothes.
Before Application, the mixture should be fully stirred and used in a certain proportion. The mixing container must be clean and free of other chemical substances and debris.
During and after Application, please use clean water to clean the equipment in time.

Precautions

If the product leaks, cover it with sand or soil for absorption.
For the treatment of pollutants after absorption, including cans and unused containers, they should be handled in accordance with local environmental protection standards.
Never discharge discarded paint waste into drains or water sources.
If you accidentally get into your eyes when using this product, please rinse with clean water in time. If you feel uncomfortable, please seek medical treatment in time.
In order to better protect the legitimate rights and interests of users, please do not purchase products with incomplete labels and beware of counterfeiting.
For any unclear points, please ask the local dealer for the product manual.